Not found one (must be one out there somewhere) but going to use tinkercad to design and enclosure for my old raspberry pi A based version.
See https://github.com/mi0iou/RPi_Wobbulator for details of the project
The boards approximately:
Will now create an box enclosure and then copy the boards onto it, but as a 'hole' so you get all the openings in the correct place.
Have gauge with me today so will measure those SMA connectors and the pots a bit better.
See https://github.com/mi0iou/RPi_Wobbulator for details of the project
The boards approximately:
Have gauge with me today so will measure those SMA connectors and the pots a bit better.
2 comments:
Try this:
https://www.tinkercad.com/things/i1JFfa9RCsh-bodacious-stantia/edit?sharecode=6gLVVU5_4yXwIupuKcXqQPuRRVHXed2MTG-l5fh-1fo=
Its for a B version, but should work ( with modifications) for you.
Cover link.
Mods will have to be made for your SMA ports.
https://www.tinkercad.com/things/ecCY7Svq8LI-smashing-bombul/edit?sharecode=USa8C3yQjfRMbgPC0dBacJXZryBwU3QfyRuI1PuygLI=
Post a Comment