Just rough right now... got to rethink that bottom left corner. Might be fine one the sides are on.
Got plenty of plywood for the sides, base will be a bit thicker.
Working out adding a small LED strip, vaccum hose and emergency on/off switch. Front will eventually have a door.
Not the quietest of machines when milling pcb.
The spindle is c80W so that looks like the weak point, got a few ideas for alternatives. Might not be controllable off the PCB though.
Yes will be milling PCB with it. Max size about 250mm x 180mm
Got plenty of plywood for the sides, base will be a bit thicker.
Working out adding a small LED strip, vaccum hose and emergency on/off switch. Front will eventually have a door.
Not the quietest of machines when milling pcb.
The spindle is c80W so that looks like the weak point, got a few ideas for alternatives. Might not be controllable off the PCB though.
Yes will be milling PCB with it. Max size about 250mm x 180mm
No comments:
Post a Comment