Tuesday, 28 August 2018

tinkercad to make mi0iou wobbulator enclosure

Not found one (must be one out there somewhere) but going to use tinkercad to design and enclosure for my old raspberry pi A based version.

See https://github.com/mi0iou/RPi_Wobbulator for details of the project










The boards approximately:

Will now create an box enclosure and then copy the boards onto it, but as a 'hole' so you get all the openings in the correct place.

Have gauge with me today so will measure those SMA connectors and the pots a bit better.

at

2 comments:

  1. John M.30 August 2018 at 17:17

    Try this:
    https://www.tinkercad.com/things/i1JFfa9RCsh-bodacious-stantia/edit?sharecode=6gLVVU5_4yXwIupuKcXqQPuRRVHXed2MTG-l5fh-1fo=

    Its for a B version, but should work ( with modifications) for you.

    ReplyDelete
  2. John M.30 August 2018 at 17:20

    Cover link.

    Mods will have to be made for your SMA ports.

    https://www.tinkercad.com/things/ecCY7Svq8LI-smashing-bombul/edit?sharecode=USa8C3yQjfRMbgPC0dBacJXZryBwU3QfyRuI1PuygLI=

    ReplyDelete