ID stepper

This is the stepper used on CNC from China.

Going to try to ID it.

I *think* it is a NEMA 17 1.8 degree per step motor.

• No. of Phase: 2
• Lead Wires: 4
• Step Angle Accuracy: ±5%(Full step, no load)
• Resistance accuracy: +- 10%
• Inductance accuracy: +- 20%
• Speed: Various Speed (Low speed)
• Step Angle: 1.8 Degree
• Rated Current 1.33A
• Rated Voltage: 12V - 24V DC
• Holding Torque: 1.26N.m
• Shaft Radial force: 2.2Kg/cm
• Shaft: 5mm round shaft
• Wire length: 30cm
• Frame size: 42mm x 42mm