Friday, 15 January 2010

Flea Update III - T1 high res pictures



As promised High res pictures of T1 winding.

I used 3 colour wires (this always makes identification easier).

Primary is Gold
Secondaries are Green and Red.




Green connects between LPF and Ground
Red +Vcc and Q1
Gold +Vcc and C3 (The trimmer)

T1 sits about 4mm above the ground plane held there by the wires solder points. I had thought about sticking an off cut of an old loyality card or credit card, my favourite insulator of choice, underneath it.

2 comments:

  1. Thanks for the close-up pix of the main transformer Dom.

    ReplyDelete
  2. The secondary Red and Green windings REALLY are in the same direction. The connection from Red secondary winding cross over underneath.

    ReplyDelete